Single High Rollformers

For over five decades, Bradbury Single High Rollformer Panel Lines have consistently helped manufacturers of roll formed building panels bring concealed- and exposed-fastener panels to market. The Bradbury Group has the complete building panel solution for customers working with 20-gauge to 31-gauge steel. We also have the capability to supply notching, punching, in-line sealant, and swaging in a complete “on-the-fly” system. The Bradbury flying BOSS™ Shear supplies unsurpassed accuracy (+/- 1/16") and throughput (300 FPM) to complement all of our high-performance panel lines.

Double High® Rollformers

Bradbury Double High® Rollformers feature upper and lower passlines of tooling that can be individually fed to form different profiles by raising or lowering an entry conveyor.

Rafted® Rollformers

The Rafted® Rollformer option can be built into standard systems. Inboard and outboard stands, shafts, and tooling are mounted on removable subplates, or rafts, so that complete sets of tooling can be rapidly exchanged - without handling individual tools or resetting roll gaps.

The B.O.S.S.™ Shear

The Bradbury Orbital Servo Shear (B.O.S.S.™) brings a revolution to metal sheet cutting. This high speed, closed loop flying shear was developed to increase shearing productivity - and there is no other piece of equipment like it. With its state-of-the-art features, the B.O.S.S.™ provides high production with close tolerance shearing. The intelligent drive and shear system allows the B.O.S.S.™ to be close coupled to a new or existing rollformer and acceleration or deceleration of the line does not affect the cut.

Product Description & Specs

Bradbury 300 FPM BOSS Line with Underlayment Fixture

Double-High Rollformer with BOSS Shear

Single-High Rafted Rollformer with BOSS Shear


Panel Line with Close-Coupled BOSS Shear




Single-Level™ Rollformers

Our Single-Level™ Rollformers provide a cost-effective rollforming line for the production of one specific roofing or wall panel profile. An integrated uncoiler, stationary post-cut hydraulic shear, and runout table are standard equipment. Electromechanical drive systems, multiple program controls, flying shears, and other optional equipment is available for all of our rollformers.

Dual-Level™ Rollformers

Produce two profiles within the same floorspace required for a single-level machine. Our Dual-Level™ Rollformers are based on the same design as our Single-Level™ units but have top and bottom infeed guides, two levels of dedicated tooling, a double-acting stationary shear. Twin electromechanical drive systems, multiple-program controls, flying shears, and other options are available for all of our rollformers.


Rafted® Rollformers

Rafted® units enable operators to switch quickly from one product profile to another. They consist of a base chassis fitted with hardened tapered locating pins for self-alignment of tooling raft sections. Replaceable tooling rafts, or modules, are outfitted with complete tool sets for producing a specific profile. The chassis is equipped with all components needed to run the tooling rafts. Drives have double or multiple quick-connect input shafts.

Hayes Dual Level™ Roll Former